As control panels become more complex, space is increasingly valuable. The PanelMax line of products from Panduit Corp. enables control panel engineers to save space, improve performance, increase safety, and facilitate assembly and troubleshooting. The PanelMax line includes includes the DIN Rail Wiring Duct, the Corner Wiring Duct, Shielded Duct and Hinged Cover Duct.
PanelMax DIN导轨接线管优化了外壳空间的使用。该产品可降低新项目中的外壳大小，或者可以在翻新应用中获得空间。该产品与用户的DIN轨和DIN架组件兼容。通过将组件从面板上抬高，技术人员可以更好地访问组件和电线ID标签，缓解电线安装和故障排除。
典型的控制面板布局具有交替行的DIN导轨和接线管。这样做是为了允许从DIN导轨安装的组件中进行接线。相比之下，PanelMax DIN导轨接线管有两个通道，并且DIN导轨安装在接线管的顶部。这允许从DIN轨安装的组件进行接线，从而将两侧的通道馈入，从而节省空间。与常规产品相比，PanelMax DIN导轨管道可节省多达30％的面板空间，最多将材料成本降低25％，并将安装时间降低高达50％。
In addition, the PanelMax DIN Rail Duct is stronger than traditional wiring duct and easily supports the weight of DIN rail-mounted components.
Another space-saving product is the PanelMax Corner Wiring Duct.
传统上，控制面板中的拐角需要两个管道通道，这些通道用于垂直运行电线以连接各种水平线导管。这些垂直的管道通道必须从角落移出，以允许访问管道盖。通常，这会导致角成为无法使用的“死”空间。但是，PanelMax角接线管可以将其紧贴在外壳的角落，取代了两个垂直通道，以节省侧面和背面面板上现有的外壳中的空间。这使工程师能够再收回多达20％的面板空间。
Besides saving space, this improves access to components and provides a clean transition of wiring from the back panel to the side panels.
Aside from space, noise mitigation is also an issue with control panel design. Noise causes problems within controls and communications, but these problems can be reduced with a three-step approach:
- Good grounding and bonding to reduce noise sources.
- 将信号线与已知噪声源分开和分离。
- Applying shielding and filtering to control the noise that does get coupled into the circuits.
The PanelMax Shielded Wiring Duct is compatible with the PanelMax Noise Shield to provide versatile protection against noise. The continuous foil shield and the metal noise barrier reduces electromagnetic and radio frequency noise between sensitive and noisy wiring by up to 20 dB or 90 percent NVR (equivalent to 6 inches of air spacing).
For more information, click 这里 .
